Waterproofing is essential to prevent structural damage to buildings. The damage that can be caused by a roof in poor condition is enormous, even allowing water to leak into the building.

Polyurea is a two-component synthetic polymer, which after being applied by hot spraying and at high pressure solidifies in 4-6 seconds. The result is a material similar to plastic or rubber, very stable to weathering, waterproof, elastic and very hard, very resistant...

The main threat affecting the envelopes of buildings is leaks. The consequences are often insidious, as the symptoms can take a long time to manifest themselves and, on many occasions, the problem is not acted upon until these leaks are detected in the lower houses,...

Investing in​ hygrothermal roof insulation​ is a very profitable decision because it improves interior comfort as well as the energy efficiency of the building. It is estimated that up to 30% of a building's energy can be lost through an insulated roof. In addition, a...

Polyurethane is the material resulting from the chemical reaction of two elements, polyol and isocyanate. It is versatile, resistant, durable, easy to install and has a very low environmental impact; it is widely used in construction and industry as thermo-acoustic...

Urespray P-500 is a material used for waterproofing and protection of very different kind of surfaces. It is a polyurethane elastomer based on pure polyurea, which has the European Technical Assessment (ETE nº 16/0153). It is formed with the reaction of two liquid...