Polyurethane Systems for building and industry

Polyurethane Spray S-383-HFO: characteristics and uses

Synthesia Technology's Polyurethane Spray S-383-HFO is a polyurethane system with two components, polyol and isocyanate, which react to produce a rigid, closed-cell foam. Applied in situ by spraying, it offers excellent performance as thermal insulation.

Read more

Thermo-acoustic floor insulation with polyurethane

Acting on the ground when insulating a building, whether it is a renovation or a new construction, is fundamental to avoid energy losses. In addition, they are very sensitive to noise, so a thermo-acoustic insulation system is an investment that not only improves...

Read more

Types of floor acoustic insulation

The acoustic insulation of the floors is essential for the comfort of the users. This is a point where disturbing noises are transmitted between neighbours. In addition, thermal insulation of floors greatly improves the energy efficiency of buildings and the comfort...

Read more

Insulation for slabs between floors

Over time, slabs insulation deteriorates and loses its thermal and acoustic qualities. In the case of old buildings, it is common that this insulation does not even exist. 

Read more

Floors insulation

When it comes to applying thermal insulation techniques, floors are usually overlooked, since the insulation of façades and roofs of buildings seems more important. However, a large part of the energy losses in buildings (up to 20%) occur through floors, so the use...

Read more

Sprayed polyurethane insulation for floors: Phono Spray S-907

Floors are some of the elements of an envelope that must be taken into account when it comes to insulating acoustically a room, which is usually delimited by two of them: the upper and the lower floor. Sprayed polyurethane systems are an optimal material to insulate...

Read more
1 2

FEATURED POST

Flotabilidad-barco-poliuretano-1-3

Filling boats with polyurethane foam: buoyancy and insulation

Like thermal tanks, boats also benefit from the advantages of using polyurethane as a large cavity filler. In the case of boats, filling the hull with polyurethane ensures insulation and buoyancy. The latter is a basic requirement to meet the highest quality standards.

EN - SEGUIR LEYENDO

 

MOST VIEWED ARTICLES

Find what you want

    SUBSCRIBE TO OUR BLOG

    Download Poliuretan Spray S-303HFO
    Download catalogue
    Technical Data Sheet Poliuretan Spray S-35RGB/ECO